沈阳市铁西区鸿泰惠美五金机电产品经销处(上海泉成泵阀制造有限公司辽宁总代理)

欢迎你!
沈阳市铁西区鸿泰惠美五金机电产品经销处(上海泉成泵阀制造有限公司辽宁总代理) >> 首页 行业动态:

产品大全

QCRY导热油泵

产品分类:
油泵/导热油泵

产品介绍

产品概述 Product description
 
QCRY系列热油泵技术先进、效率高,在热态下能长期稳定无泄漏,无附加冷却系统,使用安全可靠等特点,在我国载热体加热系统中得到了广泛的使用,已经进入石油、化工、橡胶、塑料、制药、纺织、印染、筑路、食品等各个工业领域,主要用于输送不含固体颗粒的弱腐性高温液体,使用温度≤370℃,是一种理想的热油循环泵。
QCRY series hot oil pump, featured with advanced technology and high efficiency, can ensure no leakage for long time under heat. It doesn’t have additional cooling system, making operation safe and dependable. It has been widely used in the heating system of heat carrier. Now it has entered into the industries of petroleum, chemical, rubber, plastic, pharmaceutical, textile, printing, dyeing, road construction and foodstuff etc., mainly used to handle light corrosive high temperature liquid not containing solid particles, service temperature ≤370℃. It is an optimal hot oil circulating pump.
结构特点Structure characteristics
 
QCRY系列热油泵是本单位消化吸收国外油泵的基础上研制的第二代产品,基本结构形式为单级单吸悬臂式脚支撑结构,泵的进口为轴向吸入,出口为中心垂直向上,和电机同装于底座上。
QCRY系列热油泵的支撑采用了双端球轴承支撑的结构形式,前端采用润滑油润滑,后端采用润滑脂润滑,中间有一导油管,用以随时观察密封情况和回收导热油。
采用自热散热结构,改变了传统的水冷却结构,使结构简单,体积小,节约运行费用,性能好,使用可靠。
LQRY系列热油泵,(1)采用填料密封和机械密封相结合的形式,填料密封用耐高温的填料,具有良好的热态适应性,而机械密封则采用机械强度高,耐磨性好的硬质合金材料,保证了高温情况下的密封性能。(2)采用第三代聚四氟乙烯(简称PTFE)做唇形密封,使密封性能产生了飞跃,比橡胶类密封可靠性提高25倍,耐腐蚀性能极强。  
QCRY series hot oil pump is the second generation developed on the basis of the oil pumps abroad, basically structured as single stage single entry overhung foot supported. Pump inlet is axial suction, and outlet has its center vertically upward, which are mounted, together with the motor, at the bottom.
QCRY series hot oil pump is supported by the ball bearings at the both ends, front end lubricated by lubricating oil, while back end lubricated by grease, with an oil conduit in the middle used to observe the conditions of sealing and recovery of heat conduction oil. 
Use of self heating and self radiating structure, a change to the conventional water cooling structure, so as to achieve simple structure, small volume, economy of operation cost, outstanding performance and dependable operation.
QCRY series hot oil pump, (1) with the combination of packing seal and mechanical seal, the former using high temperature resistant packing to enable outstanding thermal adaptability, while the latter using hard alloy material of high mechanical strength and sound wearing resistance, so as to ensure the sealing performance under high temperature conditions. (2) Use of the third generation PTFE for lip seal, which is a great improvement to sealing performance. The dependability has been increased by 25 times compared with rubber seal, and plus, fairly good corrosion resistance.
 

联系方式

  • 公司名称:
  • 沈阳市铁西区鸿泰惠美五金机电产品经销处(上海泉成泵阀制造有限公司辽宁总代理)
  • 联 系 人:
  • 田先生
  • 联系地址:
  • 沈阳市铁西区腾飞二街58号滑翔五金城南厅F1-014
  • 邮政编码:
普通会员
沈阳市铁西区鸿泰惠美五金机电产品经销处(上海泉成泵阀制造有限公司辽宁总代理)

田先生

  • 地址:
  • 沈阳市铁西区腾飞二街58号滑翔五金城南厅F1-014